Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Master Cylinder on a Porsche Boxster 986

Model: Porsche Boxster 986, MK 1 - Years 1996-2004

In this video tutorial, you will learn how to remove the brake master cylinder from a Porsche Boxster 986. Open the hood and first remove the brake pump along with the fluid reservoir by disconnecting the electrical connector and unscrewing the mounting screws. Next, unscrew the central screw using a Torx wrench and remove the front wheel. At this point, perform the brake bleeding by removing the fluid and opening the bleed screw, then press the pedal to let it out, as shown in the video!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Side Air Intake (Snorkel) on Porsche Boxster 986
How to Remove the Side Air Intake (Snorkel) on Porsche Boxster 986
Porsche Boxster (1996-2004 / 986, MK 1) In this short video, you will see how to remove and replace the side air intake or snorkel on a Porsche Boxster 986 in simple and quick steps. First,…
Removing the Radiator from a Porsche Boxster 986
Removing the Radiator from a Porsche Boxster 986
Porsche Boxster (1996-2004 / 986, MK 1) Follow these instructions to remove the cooling radiator from a first-generation Porsche Boxster 986. First, open the front trunk and remove the uppe…
How to Change Engine Oil and Oil Filter on Porsche Boxster 986
How to Change Engine Oil and Oil Filter on Porsche Boxster 986
Porsche Boxster (1996-2004 / 986, MK 1) In this video, follow the step-by-step process to change the engine oil and oil filter on a Porsche Boxster 986 as part of regular maintenance. First…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos