Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Porsche
  4. :
  5. 911
  6. : Removal and replacement of filter and engine oil

Porsche 911 - Video tutorial

Model: Porsche 911 996 - Years 1997-2005
Part: Oil filter
Operation: Removal and replacement of filter and engine oil

This video shows us how to replace the filter and engine oil in our car. First of all, we identify where the cap is placed on the cup to let the oil flow out, once we find it we place a basin under it where the used oil will end up. As soon as we start to turn the cap, the oil will begin to come out so do this quickly if you don't want to get dirty. Once all the engine oil has been removed we will have to unscrew and remove the oil filter placed immediately behind the sump; finally removed the filter before reassembling everything, replace the cartridge inside the filter and the sealing gasket.


Posted on 30 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos