Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Porsche 911 996 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Air filter

See other generations:
Video tutorial

Replacing the engine air filter is an extremely simple task that does not require special tools or skills. Just remove the screws securing the filter housing cover and disconnect the hose from the throttle body to facilitate lifting and extracting the filter.

Once you ensure there are no dirt residues inside the filter seat (remove them using a vacuum cleaner, not compressed air), install the new filter and reassemble everything in reverse order. For the vehicle in question, you might also consider installing a performance filter that, in addition to improving engine performance, does not need to be replaced during subsequent maintenance but simply washed with appropriate cleaners.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Cabin Air Filter Replacement for Porsche 996
Cabin Air Filter Replacement for Porsche 996
Porsche 911 (1997-2005 / 996) Both the engine air filter and the cabin air filter replacement are maintenance tasks that you can easily perform yourself, despite the vehicle's imp…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Porsche 911 (1997-2005 / 996) The cabin air filter is located under the front hood, on the passenger side, just below the windshield. Once you open the hood, remove the plastic co…
Replacement of Engine Air Filter with K&N Model
Replacement of Engine Air Filter with K&N Model
Porsche 911 (1997-2005 / 996) Disconnect the connector attached to the mass air flow sensor, loosen the clamp on the hose connected to the throttle body, and unscrew the screws se…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos