Do it yourself
Frequently asked questions about cars and motorcycles

What to do if the cup holder of the Porsche 911/Cayman/Boxster makes noise inside the cabin.

Model: Porsche 911 997 - Years 2005-2011
Part: Body

The most common cause of the rattling of the cup holder in Porsche vehicles like the 911, Cayman, and Boxster is the breakage of the plastic pin that connects the closing lever of the spring. Without tension, the lever and its housing rattle freely, creating the annoying noise. Let's see how to fix it: open the glove compartment, unscrew the two 4 mm hex screws that secure the cup holder, and pull it out of its housing. Unscrew the screws on the top cover of the cup holder and remove the arm to check if the plastic pin that connects to the spring is broken. If it is, that is the cause of the noise. We can repair it with metal wire by creating a hook at one end: insert it into the original hole of the arm, position it in its housing with the cup holder open, hook the other end of the wire to the original spring mechanism to create tension, and wrap the wire around itself several times to secure it firmly, ensuring there is tension when the cup holder is closed. If extra damping is desired, apply small pieces of felt tape at the contact points to dampen vibrations. Reassemble the arm and cover, and put the cup holder back into the dashboard by screwing in the two 4 mm screws.

Posted on 7 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Porsche 911 (1997-2005 / 996) Here is a video showing how to install the front bumper on the Porsche BBMD or Porsche Boxster. First, position the bumper at the front of the vehicl…
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…
Porsche 911 (2005-2011 / 997) Annual maintenance costs for the Porsche 911 are somewhat high but are definitely beneficial for the longevity of your vehicle. The cost of the servi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos