Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Porsche 911?

Model: Porsche 911 991 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil in a Porsche 911, loosen the bolt that secures the oil drain plug: this is located at the rear bottom of the vehicle, near the oil pan. Once the plug is removed, collect all the used oil in a properly positioned container; after the oil has fully drained, close the plug.

Then, by opening the rear engine compartment, remove the oil filter located on the right side and replace it with a new one; finally, top off the oil through the vent on the left side of the compartment.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace Engine Oil and Filter on Porsche 911
How to Replace Engine Oil and Filter on Porsche 911
Porsche 911 (1982-1991 / ) How to replace engine oil and filter on Porsche 911? Follow these steps: Open the rear hood and lift it up, secure it, and remove the oil filler cap.…
How to Change the Engine Oil and Oil Filter on the Porsche 911
How to Change the Engine Oil and Oil Filter on the Porsche 911
Porsche 911 (2005-2011 / 997) Today, let's explore the guide on how to perform routine maintenance by changing the engine oil and oil filter on the Porsche 911. First, lift the ve…
How to Change the Transmission Fluid on a Porsche 911?
How to Change the Transmission Fluid on a Porsche 911?
Porsche 911 (2005-2011 / 997) To change the transmission fluid on a Porsche 911, you need to access the underside of the car, near the transmission case. Here, you will find the d…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos