Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How does the Tire Fill Assist of the Ram 1500 work?

Model: RAM 1500 MK 5, DT - Years 2019-2026
Part: Onboard computer

The Tire Fill Assist of the Ram 1500 is a feature designed to simplify tire inflation: it constantly monitors the tire pressure, and when a tire loses pressure, it emits an audible signal to indicate when the pressure reaches the recommended level. The instrument panel displays the tire pressure, allowing you to monitor the autonomous inflation process. This greatly simplifies the inflation process, reducing the risk of over or under inflation; it helps maintain optimal tire pressure, improving safety and fuel efficiency.

Posted on 29 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the infotainment system of the RAM 1500
How to reset the infotainment system of the RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) In this guide, we will see the instructions that will allow us to reset the multimedia system and infotainment of the RAM 1500. First, we get on boar…
How to reset the multimedia system of the Dodge RAM 1500
How to reset the multimedia system of the Dodge RAM 1500
RAM 1500 (2019-2026 / MK 5, DT) Today's steps will show us the process of resetting the factory radio and multimedia system of the Dodge RAM 1500. First, we get on board the vehicle…
Where is the fuse box of the RAM 1500 located?
Where is the fuse box of the RAM 1500 located?
RAM 1500 (1994-2001 / MK 2, BR, BE) Thanks to the following procedure, you will be able to find the box containing all the fuses of your RAM 1500 in a few seconds and, above all, in tot…

How to Remove the Air Fan from a Nissan Juke

Learn how to remove the air fan from a Nissan Juke. Open the glove compartment and disconnect the end stop brackets, then unscrew the securing screws with a screwdriver. Unscrew the side screws in the glove compartment and remove the plastic door. Unscrew the screws again, and after disconnecting the power wires, pull the glove compartment out from the dashboard. Remove the fan after disconnecting the power wires. Clean the fan as necessary (disassemble the fan and its parts). Finally, reinstall the previously removed fan (new fan) and all its components under the glove compartment.

Watch the video!


by ScegliAuto

More videos