Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a RAM 2500 6.7L

Model: RAM 2500 MK 4, DJ, DS, D2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

In today's tutorial video, we will see how to disassemble and replace the fuel filter on a fourth-generation RAM 2500 with a 6.7L engine. First, lift the vehicle and locate the fuel filter; then use a socket wrench to unscrew and remove the fuel filter, allowing any excess diesel to drain out. At this point, replace the filter cartridge with the new one, using the original replacement; then hand-tighten the filter before gently tightening it with the wrench, following the video to the end!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Diesel Fuel Filter in a RAM 2500
How to Replace the Rear Diesel Fuel Filter in a RAM 2500
RAM 2500 (2009-2019 / MK 4, DJ, DS, D2) In today's tutorial video, see how to remove and replace the rear diesel fuel filter in a RAM 2500 by following these simple and quick steps. First, …
How to Replace the Fuel Filter on a RAM 2500?
How to Replace the Fuel Filter on a RAM 2500?
RAM 2500 (2009-2019 / MK 4, DJ, DS, D2) The RAM 2500 has two fuel filters: the first is located inside the engine compartment and can be accessed from the side of the battery. Disconnect th…
How to replace the diesel fuel filter of the RAM 2500 6.7L.
How to replace the diesel fuel filter of the RAM 2500 6.7L.
RAM 2500 (2019-2026 / DT, MK 5) Below we will discover the instructions that will allow us to disassemble and replace the diesel filter of the RAM 2500 6.7L. First, let's open the v…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos