Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the diesel fuel filter of the RAM 2500 6.7L.

Model: RAM 2500 DT, MK 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Diesel fuel filter

See other generations:
Video tutorial

Below we will discover the instructions that will allow us to disassemble and replace the diesel filter of the RAM 2500 6.7L. First, let's open the vehicle's hood and start locating the diesel filter, which is found in the lower right part of the engine compartment; we will use a 28 mm socket wrench to unscrew the diesel filter, disconnecting the fuel lines to remove and replace the cartridge with a new one, as shown in the video.

At this point, we will reinstall the diesel filter, connecting it and gently tightening it with the wrench.


Posted on 27 December 2025 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter on a RAM 2500 6.7L
How to Replace the Fuel Filter on a RAM 2500 6.7L
RAM 2500 (2009-2019 / MK 4, DJ, DS, D2) In today's tutorial video, we will see how to disassemble and replace the fuel filter on a fourth-generation RAM 2500 with a 6.7L engine. First, lift…
How to Replace the Rear Diesel Fuel Filter in a RAM 2500
How to Replace the Rear Diesel Fuel Filter in a RAM 2500
RAM 2500 (2009-2019 / MK 4, DJ, DS, D2) In today's tutorial video, see how to remove and replace the rear diesel fuel filter in a RAM 2500 by following these simple and quick steps. First, …
How to Replace the Diesel Filter in a RAM 2500 Pickup?
How to Replace the Diesel Filter in a RAM 2500 Pickup?
RAM 2500 (2002-2009 / D1, MK 3, DR, DH, DC, DM) In this tutorial, you will see how to replace the diesel filter in a RAM 2500 pickup, a very simple and quick operation. Before proceeding, ensure th…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos