Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 2500
    4. : How to replace the diesel filter in the RAM 2500 pick-up?

RAM 2500 - Video tutorial

Model: RAM 2500 MK 3, DR, DM, D1, DH, DC - Years 2002-2009
Part: Diesel filter
Operation: How to replace the diesel filter in the RAM 2500 pick-up?

In this tutorial we can see how to replace the diesel filter in the RAM 2500 pick-up, a very simple and fast operation. Before proceeding, make sure that the engine is perfectly cold in order to operate in complete safety. Let's start by identifying the filter, located just to the left of the battery, then connect a sufficiently long hose to the exhaust manifold, open the tap and drain all the fuel contained within it. At this point we can unscrew the cap, extract the filter and insert the spare, taking care to also use a new gasket.


Posted on 23 April 2024 by ScegliAuto



How to replace the cabin filter in the RAM 2500 pick-up?
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) As we can see in this tutorial, replacing the cabin air filter in the RAM 2500 pick-up is a very quick and easy operation. First of all we will have
How to replace the air filter in the RAM 2500 pick-up?
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) As we can see in this tutorial, replacing the air filter in the RAM 2500 pick-up is a very quick and easy operation. After getting the right replacem
How to replace the cabin filter in the RAM 2500 pick-up?
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) Replacing the cabin air filter in the RAM 2500 pick-up is very simple, let's see how to proceed in this tutorial. The filter is positioned behind the

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos