Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear taillight on a RAM 1500 pickup truck?

Model: RAM 1500 MK 5, DT - Years 2019-2026
Part: Tail light

In this tutorial, we can see how to disassemble and replace the rear taillight on the RAM 1500 pickup truck. For this simple and quick operation, we will need a Torx T25 screwdriver and, of course, the right replacement part. First, we open the cargo door, release the corresponding limit switch cord, and proceed to remove the indicated clips. Next, we unscrew the three fixing screws, grip the taillight, and detach it from the body by pulling it towards us. At this point, we can disconnect the connector, remove the bulb holders, and install the replacement by following the reverse procedure.

Posted on 4 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan in the RAM 1500 pickup?
How to replace the cabin fan in the RAM 1500 pickup?
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this tutorial, we can see how to replace the cabin fan in the RAM 1500 pickup, an extremely simple and quick operation. First of all, make sure th…
How to Reset the Oil Service Light on a RAM 1500 Pickup?
How to Reset the Oil Service Light on a RAM 1500 Pickup?
RAM 1500 (2019-2026 / MK 5, DT) In this tutorial, you will see how to reset the oil service light on a RAM 1500 pickup, a very simple and quick operation. Before proceeding, ensure …
How to reset the AdBlue warning light on the RAM 1500 pickup?
How to reset the AdBlue warning light on the RAM 1500 pickup?
RAM 1500 (2009-2019 / DS, MK 4, DJ) If the AdBlue light comes on in the instrument panel of the RAM 1500 pick-up, it means that the liquid of the anti-pollution system has reached the m…

How to Remove the Cabin Filter from a Nissan Juke

In this video, let’s see how to remove the cabin air filter from a Nissan Juke. Open the glove compartment and unclip the end stop arms. Then, use a screwdriver to remove the securing screws. After completing the previous steps, unscrew the side screws in the glove compartment and remove the plastic cover. Unscrew the screws again, and after disconnecting the power cables, pull the glove compartment away from the dashboard. Then, slide the air filter out of its housing as shown in the video. Insert the new filter and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos