Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Filter Replacement on RAM 3500 (USA)

Model: RAM 3500 DS, MK 4, DJ - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

Open the hood and locate, on the right side of the two upper covers of the engine block (one front and one in the center), the fuel filter cover. Unscrew the cover cap with a suitable socket wrench and remove the cap, under which the filter is located.

At this point, replace the filter, making sure to install it in the indicated direction (with the seals facing down). Replace the O-ring under the cap after lubricating it with a drop of oil. Reposition the cover with the filter in the engine compartment and screw it back on with the socket wrench.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Fuel Filter Replacement for Dodge RAM 3500 6.7L
Fuel Filter Replacement for Dodge RAM 3500 6.7L
RAM 3500 (2019-2026 / DT, MK 5) Today, let's go through the main steps to remove and replace the fuel filter on a Dodge RAM 3500 6.7L. First, lift the vehicle and locate the fuel fi…
How to Replace the Fuel Filter on a Ram 3500 [USA]
How to Replace the Fuel Filter on a Ram 3500 [USA]
RAM 3500 (2019-2026 / DT, MK 5) Position the vehicle on the lift. The fuel filter is located approximately in the center of the chassis above the transmission. Using a socket wrench…
How to replace the fuel filter of the RAM 3500
How to replace the fuel filter of the RAM 3500
RAM 3500 (2019-2026 / DT, MK 5) Today we will discover the main instructions that will allow us to disassemble and replace the diesel fuel filter of the RAM 3500, in simple steps. F…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos