Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 2500
    4. : Removal of the central console of the RAM 2500 - 3500

RAM 2500 - Video tutorial

Model: RAM 2500 DT, MK 5 - Years 2019-2024
Part: Central tunnel
Operation: Removal of the central console of the RAM 2500 - 3500

In today's video we will see how to remove and replace the console or the central tunnel of the RAM 2500, but also of the 3500. First we get on board the car and begin to remove the small plastic covers that we find at the bottom on the sides; after which we use a socket wrench to unscrew the screws located under the plastic caps, as shown in the video. At this point we remove the side plastics of the dashboard, bordering the central tunnel; now let's go and definitively remove the car's central console, disconnecting all the electrical wiring underneath!


Posted on 22 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos