Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Dodge RAM 3500 battery

Model: RAM 3500 DS, MK 4, DJ - Years 2009-2019
Part: Battery

Below we will see the main steps that will allow us to disassemble and replace the battery of the Dodge RAM 3500. First we open the engine hood of our car and begin to disconnect both battery terminals (positive and negative pole), unscrewing the nuts with a wrench 10 mm socket or star; after which we unscrew the screw of the battery bracket, which we find at the bottom, to remove it and replace it with the new one, as shown in the video. At this point we are going to install the new battery, having the same amperage, applying the reverse procedure!

Posted on 12 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How do i replace the remote control battery of the Dodge Ram 3500?
How do i replace the remote control battery of the Dodge Ram 3500?
RAM 3500 (2019-2026 / DT, MK 5) In order to replace the battery of the Dodge Ram 3500 you have to remove the key from the top of the remote control, where the chrome is located. Onc…
How to replace the key battery of the Dodge RAM 3500
How to replace the key battery of the Dodge RAM 3500
RAM 3500 (2019-2026 / DT, MK 5) If you are looking for a quick and easy method that allows you to replace the battery inside the key of your 2020 Dodge RAM 3500 then all you have to…
How to remove the radio from the Dodge RAM 3500 Mk4
How to remove the radio from the Dodge RAM 3500 Mk4
RAM 3500 (2009-2019 / DS, MK 4, DJ) The guide shows you how to remove the Dodge RAM 3500 Mk4 car stereo. The first operation is to disconnect the negative pole cable of the battery. At …

Other guides you may be interested in

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos