Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Ram 3500 oil warning light

Model: RAM 3500 DJ, DS, MK 4 - Years 2009-2019
Part: Service warning light

If you have just replaced the engine oil and its filter on your Ram 3500, but the warning light continues to turn on steadily, you must necessarily perform the following manual reset procedure. Fortunately, these are very simple steps so you won't have any difficulty putting them into practice. First, go inside the cockpit and start the instrument panel. Simultaneously press the accelerator pedal three times in succession and immediately turn off the ignition. Finally, start the latter again and the procedure is completed successfully.

Posted on 25 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light in the Ram 3500?
How to reset the oil light in the Ram 3500?
RAM 3500 (2019-2026 / MK 5, DT) The video shows us how to reset the oil warning light in the Ram 3500. This operation can be carried out through the on-board computer, without conne…
How to reset the oil warning light on a Dodge Ram 3500
How to reset the oil warning light on a Dodge Ram 3500
RAM 3500 (2009-2019 / DJ, DS, MK 4) In this short video tutorial today we are going to see how to reset the oil warning light on a 2012 Dodge Ram 3500. Doing this operation is really ve…
How to reset the oil warning light on the Dodge RAM 3500
How to reset the oil warning light on the Dodge RAM 3500
RAM 3500 (2009-2019 / DJ, DS, MK 4) This mini guide will be very useful for you to be able to independently and easily reset the engine oil change warning light inside your Dodge RAM 35…

Other guides you may be interested in

How to Update the TomTom on a Renault Scenic

Follow this video to update the original TomTom navigator on a Renault Scenic. This is a very simple operation; enter the vehicle, turn on the instrument panel of your car with the key fob, press the knob located near the gear lever, and find the menu with the update option. Press the knob down and up to confirm, then wait for the necessary time for the device to update. Finally, the onboard computer will display the successful update of the navigator; check everything and turn off the instrument panel with the appropriate key.

Watch the video!


by ScegliAuto

More videos