Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Ram 3500?

Model: RAM 3500 MK 5, DT - Years 2019-2026
Part: Service warning light

The video shows how to reset the oil light on a Ram 3500. This operation can be performed through the onboard computer, without connecting any professional tools to the vehicle, thus avoiding a trip to the shop. Use the buttons on the left side of the steering wheel to navigate through the various menu options. These buttons allow you to scroll through the screens until you reach the vehicle settings. From here, select the "oil life" option and reset the oil light by holding down the right arrow button for a few seconds.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Dodge Ram 3500
How to Reset the Oil Light on a Dodge Ram 3500
RAM 3500 (2009-2019 / DS, DJ, MK 4) In this short tutorial today, you will see how to reset the oil light on a 2012 Dodge Ram 3500. This operation is really easy; you can do it yourself…
How to reset the oil service on the RAM 3500 pick-up?
How to reset the oil service on the RAM 3500 pick-up?
RAM 3500 (2019-2026 / MK 5, DT) In this tutorial, we can see how to reset the oil service in the RAM 3500 pick-up, an extremely simple and quick operation, to be carried out only on…
How to Reset the Oil Light on a Ram 3500
How to Reset the Oil Light on a Ram 3500
RAM 3500 (2009-2019 / DS, DJ, MK 4) If you have just changed the engine oil and filter in your Ram 3500, but the warning light keeps coming on, you need to perform the following manual …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos