Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wheel on the Ram Promaster City

Model: RAM Promaster City MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Wheel

Video tutorial

If you need to replace the spare tire on your vehicle, you can find useful information on how to proceed in the description below and in the tutorial video. The spare tire on this vehicle is located under the trunk floor, and to remove it, you need to use the kit provided with the rod and the appropriate wrench, which should be inserted into the rear of the floor after opening the rear hatch.

Then, turn the wrench until the tire drops down from under the vehicle. Next, disconnect the retaining cable, and at this point, you can proceed to remove the tire and replace it with the spare.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Where Are the Fuses on the RAM Promaster City?
Where Are the Fuses on the RAM Promaster City?
RAM Promaster City (2015-2022 / MK 1) The fuse boxes on the RAM Promaster City contain the fuses that control the operation of various devices in the vehicle: there are two boxes in this …
What is the fuse diagram for the RAM ProMaster City van?
What is the fuse diagram for the RAM ProMaster City van?
RAM Promaster City (2015-2022 / MK 1) If any devices in your RAM ProMaster City van suddenly stop working, first check the status of the corresponding fuses, as shown in this video. The f…
Engine Oil and Oil Filter Replacement for RAM Promaster City
Engine Oil and Oil Filter Replacement for RAM Promaster City
RAM Promaster City (2015-2022 / MK 1) Follow this step-by-step guide to perform routine maintenance by replacing the engine oil and oil filter on the RAM Promaster City. First, lift the v…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos