|
Do it yourself
| |||
| ||||
|
The smart key of the new Ram 1500 has a much less compact and minimal overall size than other brands, but fortunately this does not negatively affect the ease of replacing the battery inside it. In fact, just remove the physical emergency key by pressing on the small button located on the back of the cover and immediately afterwards it must be removed by applying a slight force with a flat screwdriver. At this point all that remains is to remove the dead battery and replace it with a new compatible one. Finally, reposition the back cover and the physical key correctly.
Posted on 11 August 2022 by ScegliAuto
Video tutorial
Related tutorials
RAM 1500
(2019-2026 /
DT, MK 5)
If the smart key on your new RAM 1500 has suddenly stopped working, you can easily solve the problem by replacing the coin cell battery inside. If yo…
RAM 1500
(2019-2026 /
DT, MK 5)
To correctly replace the button battery mounted inside the smart key of the Dodge RAM 1500 it only takes a few simple steps. You can complete the ent…
RAM 1500
(2009-2019 /
MK 4, DS, DJ)
If you want to replace the battery inside the key of your RAM 1500, but you don't know exactly how to do it, then all you have to do is read this min…
Other guides you may be interested in
|
How to Replace the Front Headlamp Bulb on a Fiat Grande Punto
To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.124
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
