Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Land Cruiser

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part:

You can clear the tyre pressure light on a Toyota Land Cruiser by ensuring all tyres are inflated to the correct pressure, as indicated on the sticker located on the driver’s door pillar. To proceed with the reset operation, turn on the ignition and press and hold the SET button located at the bottom of the steering column, near the brake pedal. Keep the button pressed until the light flashes and then turns off. To verify the reset, turn off and then turn on the ignition again.

Posted on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a Toyota Land Cruiser
How to know the fuse diagram of a Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / J120, MK 10) The fuse box in a Toyota Land Cruiser vehicle can be found inside the car's cabin, located exactly at the bottom left of the steering wheel. This box…
Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / J120, MK 10) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos