Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on the Toyota Land Cruiser

Model: Toyota Land Cruiser J300 - Years 2021-2026
Part:

In this brief guide, you will find instructions for resetting the tyre pressure warning light on the Toyota Land Cruiser; before resetting the TPMS sensors, ensure that all four tyres are at the correct operating pressure. Then, get into the vehicle and turn on the ignition; next, press and hold the reset button for three seconds, located on the lower side of the driver's side, above the brake pedal, until the tyre pressure warning light resets on the instrument display.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Land Cruiser?
How to Reset the Tyre Pressure Warning Light on a Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / J200, MK 11) To reset the tyre pressure warning light on a Toyota Land Cruiser, first ensure that all tyres are at the correct inflation pressure, as indicated on…
How to Reset the Tyre Warning Light on the Toyota Land Cruiser?
How to Reset the Tyre Warning Light on the Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / J200, MK 11) In this tutorial, you will see how to reset the tyre warning light on the Toyota Land Cruiser, a very simple and quick operation to perform only afte…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos