Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Toyota Land Cruiser?

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Toyota Land Cruiser, first inflate the tyres to the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are inflated, turn on the ignition by inserting the key into the ignition switch. Under the steering column, locate the button that allows you to reset the tyre pressure warning light, which should be held down until the light turns off.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Toyota Land Cruiser
Resetting the Tyre Pressure Warning Light on the Toyota Land Cruiser
Toyota Land Cruiser (2021-2026 / J300) In this brief guide, you will find instructions for resetting the tyre pressure warning light on the Toyota Land Cruiser; before resetting the TPMS s…
How to Reset the Tyre Pressure Warning Light on a Toyota Land Cruiser?
How to Reset the Tyre Pressure Warning Light on a Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / J200, MK 11) To reset the tyre pressure warning light on a Toyota Land Cruiser, first ensure that all tyres are at the correct inflation pressure, as indicated on…
How do you reset the tire pressure light on the Toyota Land Cruiser?
How do you reset the tire pressure light on the Toyota Land Cruiser?
Toyota Land Cruiser (2021-2026 / J300) To reset the tire pressure warning light of the Toyota Land Cruiser, first inflate the tires until they reach the recommended pressure value: this ca…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos