Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Toyota Land Cruiser remote control?

Model: Toyota Land Cruiser J300 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

In this tutorial we can see how to replace the battery of the Toyota Land Cruiser remote control, an extremely simple and quick operation. To do this we will need a replacement battery of type CR2450 and, if necessary, a small screwdriver with a flat tip. First of all, we extract the emergency metal key by pressing the appropriate button, then we lever with the key itself in the indicated slot and separate the two halves of the remote control.

At this point, we remove the old battery, insert the replacement in the right direction and reassemble everything.


Posted on 27 February 2025 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Toyota Land Cruiser?
How to Replace the Remote Battery on a Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / MK 11, J200) To replace the battery in the remote for the Toyota Land Cruiser, slide the key out of its housing to leverage it open. This will allow you to separa…
How to replace the battery in the Toyota Land Cruiser remote?
How to replace the battery in the Toyota Land Cruiser remote?
Toyota Land Cruiser (2007-2021 / MK 11, J200) To replace the battery in the remote for the Toyota Land Cruiser, you need to slide the key out from the top of the device. Once the key is removed, …
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos