Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Land Cruiser
  6. : How do you replace the battery in the Toyota Land Cruiser remote control?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Key
Operation: How do you replace the battery in the Toyota Land Cruiser remote control?

In order to replace the battery of the Toyota Land Cruiser remote control, you need to remove the key from inside its housing so that you can use it to pry open the inside. By doing this, you will be able to separate the two halves that make up the shell of the remote control, accessing its internal components. The battery can now be removed from its seat so that you can insert the new replacement piece. After replacement, you can close the remote control, insert the key into its housing, and verify that everything is working correctly.


Posted on 17 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos