Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Land Cruiser - Key

Toyota Land Cruiser (2007-2021 / J200, MK 11)
How to replace the battery of the Toyota Land Cruiser key.
In this new guide, we will discover how to change the battery inside the smart key of your Toyota Land Cruiser (year 2007-2022). First of all, you need to …read all…
Posted on 9 November 2023 by ScegliAuto
Toyota Land Cruiser (2007-2021 / J200, MK 11)
How do you replace the battery in the Toyota Land Cruiser remote control?
In order to replace the battery of the Toyota Land Cruiser remote control, you need to remove the key from inside its housing so that you can use it to pry …read all…
Posted on 17 May 2023 by ScegliAuto
Toyota Land Cruiser (2007-2021 / J200, MK 11)
How to replace the battery in the key of a Toyota Land Cruiser.
If we need to replace the remote key battery of our car because it's exhausted, in the description below we will find all the information and useful …read all…
Posted on 16 April 2023 by ScegliAuto
Toyota Land Cruiser (2007-2021 / J200, MK 11)
How to replace the battery of the Toyota Land Cruiser key.
If we want to replace the battery of our car key and remote, in the description below we can find the steps and operations to be carried out and we can also …read all…
Posted on 31 March 2023 by ScegliAuto
Alternator (1) Car stereo (2) Key (4) Timing belt (3) Checks and maintenance (11) Differential (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (1) Hand brake (1) Door panel (3) Brake pads (3) Tires (1) Pump (1) Instrument cluster (5) Wheel (2) Fuse box (9) Drums and shoes (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos