Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Toyota Land Cruiser

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
Video tutorial

If you need to replace the remote key battery because it is depleted, follow the instructions below for the replacement. You can also check the video for guidance.

Start by removing the emergency key and use it to pry open the joint between the remote and the cover. Remove the small battery cover.

Then, take out the battery from its housing and replace it with the new one, ensuring the positive terminal is facing upwards. Next, replace the small battery cover, reattach the remote cover, and insert the emergency key back.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Toyota Land Cruiser
How to Replace the Key Battery in a Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / MK 11, J200) In this new guide, you will discover how to change the battery inside the smart key of your Toyota Land Cruiser (2007-2022). First, remove the physic…
How to replace the battery in the Toyota Land Cruiser remote?
How to replace the battery in the Toyota Land Cruiser remote?
Toyota Land Cruiser (2007-2021 / MK 11, J200) To replace the battery in the remote for the Toyota Land Cruiser, you need to slide the key out from the top of the device. Once the key is removed, …
How to replace the battery of the Toyota Land Cruiser remote control?
How to replace the battery of the Toyota Land Cruiser remote control?
Toyota Land Cruiser (2021-2026 / J300) In this tutorial we can see how to replace the battery of the Toyota Land Cruiser remote control, an extremely simple and quick operation. To do this…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos