Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Brake pads

Toyota Land Cruiser - Brake pads

Toyota Land Cruiser (2007-2021 / J200, MK 11)
How do you replace the brake pads on the Toyota Land Cruiser?
In order to replace the brake pads of the Toyota Land Cruiser you have to go and lift the car, so that you go to unscrew the bolts that fix the wheel …read all…
Posted on 12 May 2024 by ScegliAuto
Toyota Land Cruiser (2002-2009 / MK 10, J120)
Removal and replacement of the rear brake pads of the Toyota Land Cruiser
In today's video we will see the main steps on how to disassemble and replace the rear brake pads of the Toyota Land Cruiser. First we lift the car and start …read all…
Posted on 6 April 2024 by ScegliAuto
Toyota Land Cruiser (2002-2009 / MK 10, J120)
How to replace the brake pads of the Toyota Land Cruiser
As a first step, remove the wheel on which it will be necessary to replace, then you will have lifted your car and placed it on the special pedestals to …read all…
Posted on 30 September 2023 by ScegliAuto
Alternator (1) Car stereo (2) Key (4) Timing belt (3) Checks and maintenance (11) Differential (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (1) Hand brake (1) Door panel (3) Brake pads (3) Tires (1) Pump (1) Instrument cluster (5) Wheel (2) Fuse box (9) Drums and shoes (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos