Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Toyota Land Cruiser

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake pads

See other generations:
Video tutorial

To replace the brake pads on a Toyota Land Cruiser, you need to lift the vehicle to access the bolts securing the wheel corresponding to the pads being replaced. Once the bolts are loosened, remove the wheel to access the components behind it. You will find the brake caliper, which needs to be removed by unscrewing the bolts that secure it to the disc, allowing the pads inside to be extracted.

This way, you can insert the new pads, reassembling all previously removed components.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Toyota Land Cruiser?
How to Replace the Front Brake Pads on a Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this tutorial, see how to replace the front brake pads on a Toyota Land Cruiser, a relatively simple task if you have good manual skills. First, o…
Removing and Replacing the Rear Brake Pads on the Toyota Land Cruiser
Removing and Replacing the Rear Brake Pads on the Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / MK 10, J120) In today’s video, you will see the main steps on how to remove and replace the rear brake pads on the Toyota Land Cruiser. First, lift the vehicle an…
How to Replace the Brake Pads on a Toyota Land Cruiser
How to Replace the Brake Pads on a Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / MK 10, J120) First, remove the wheel where the replacement is necessary, then lift your vehicle and place it on suitable axle stands to continue the work. Next, r…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos