Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Toyota Land Cruiser?

Model: Toyota Land Cruiser MK 10, J120 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake pads

See other generations:
Video tutorial

In this tutorial, see how to replace the front brake pads on a Toyota Land Cruiser, a relatively simple task if you have good manual skills. First, open the bonnet and unscrew the brake fluid cap, then lift the front of the vehicle and remove the wheels.

Next, detach the indicated metal clips, extract the pins, and remove the old pads from the caliper. At this point, clean any dirt residue, insert the new parts, and reassemble everything by following the exact reverse procedure.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Rear Brake Pads on the Toyota Land Cruiser
Removing and Replacing the Rear Brake Pads on the Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / MK 10, J120) In today’s video, you will see the main steps on how to remove and replace the rear brake pads on the Toyota Land Cruiser. First, lift the vehicle an…
How to Replace the Brake Pads on a Toyota Land Cruiser
How to Replace the Brake Pads on a Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / MK 11, J200) To replace the brake pads on a Toyota Land Cruiser, you need to lift the vehicle to access the bolts securing the wheel corresponding to the pads bei…
How to Replace the Cabin Filter in the Toyota Land Cruiser?
How to Replace the Cabin Filter in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) Replacing the cabin filter in the Toyota Land Cruiser, as we can see in this tutorial, is an extremely simple and quick operation. First, sit in the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos