Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Rear Brake Pads on the Toyota Land Cruiser

Model: Toyota Land Cruiser J120, MK 10 - Years 2002-2009
Part: Brake pads

In today’s video, you will see the main steps on how to remove and replace the rear brake pads on the Toyota Land Cruiser. First, lift the vehicle and start by removing the rear wheel; then unscrew the caliper pins by removing the screws found at the back. At this point, lever the caliper piston back; remove the caliper from the disc and the brake pads, replacing them with new (high-quality) ones. Now clean the caliper from dirt and correctly insert the new pads, reassembling everything!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads on the Toyota Land Cruiser?
How to replace the front brake pads on the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / J120, MK 10) In this tutorial we can see how to replace the front brake pads in the Toyota Land Cruiser, a relatively simple operation if you have good manual ski…
How to Replace the Brake Pads on a Toyota Land Cruiser
How to Replace the Brake Pads on a Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / J200, MK 11) To replace the brake pads on a Toyota Land Cruiser, you need to lift the vehicle to access the bolts securing the wheel corresponding to the pads bei…
How to know the fuse diagram of a Toyota Land Cruiser
How to know the fuse diagram of a Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / J120, MK 10) The fuse box in a Toyota Land Cruiser vehicle can be found inside the car's cabin, located exactly at the bottom left of the steering wheel. This box…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos