Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove and replace the wheel with the spare on the Toyota Land Cruiser

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Wheel

See other generations:
Video tutorial

Today, we will go through the main instructions for removing and replacing the wheel with the spare on the Toyota Land Cruiser. First, open the rear tailgate and start pulling out the spare wheel replacement kit; then unscrew the bolt with the appropriate key to remove the spare wheel from the floor, as shown in the video.

Next, lift the vehicle and remove the wheel, replacing it with the spare; secure it properly and tighten the bolts in a criss-cross pattern, following the video tutorial to the end!


Updated on 22 October 2026 by ScegliAuto


Related tutorials

Where is the Spare Wheel of the Toyota Land Cruiser Located?
Where is the Spare Wheel of the Toyota Land Cruiser Located?
Toyota Land Cruiser (2002-2009 / MK 10, J120) The spare wheel of the Toyota Land Cruiser is located under the vehicle's floor, corresponding to the boot area: you can access the wheel by opening …
Where is the Spare Wheel Located on the Toyota Land Cruiser?
Where is the Spare Wheel Located on the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) In the Toyota Land Cruiser, the spare wheel is located under the vehicle's floor, corresponding to the boot area. You can access the wheel by opening…
How to Replace the Brake Pads on a Toyota Land Cruiser
How to Replace the Brake Pads on a Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / MK 11, J200) To replace the brake pads on a Toyota Land Cruiser, you need to lift the vehicle to access the bolts securing the wheel corresponding to the pads bei…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos