Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Spare Wheel of the Toyota Land Cruiser Located?

Model: Toyota Land Cruiser MK 10, J120 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Wheel

See other generations:
Video tutorial

The spare wheel of the Toyota Land Cruiser is located under the vehicle's floor, corresponding to the boot area: you can access the wheel by opening the rear hatch and lowering the step at the bottom of the hatch. Inside the panels of this step, you will find the tools needed to remove the wheel from its location: by removing the protective panel, you can loosen the underlying bolt, noting that the wheel will start to detach from the vehicle's lower floor.

Once fully unscrewed, you can use the spare wheel to perform the replacement.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to remove and replace the wheel with the spare on the Toyota Land Cruiser
How to remove and replace the wheel with the spare on the Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / MK 11, J200) Today, we will go through the main instructions for removing and replacing the wheel with the spare on the Toyota Land Cruiser. First, open the rear …
Where is the Spare Wheel Located on the Toyota Land Cruiser?
Where is the Spare Wheel Located on the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / MK 10, J120) In the Toyota Land Cruiser, the spare wheel is located under the vehicle's floor, corresponding to the boot area. You can access the wheel by opening…
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos