Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to bleed and replace Toyota Corolla brake oil

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 1 - Years 1995-2002
Part: Brake oil
Operation: How to bleed and replace Toyota Corolla brake oil

Let's see in this guide the main steps that will allow us to bleed and replace the Toyota Corolla brake oil. First we lift the car and remove the front wheel; then we go to insert a small tube on the bleed valve that we find on the brake caliper, turning it with a key to open it, as shown in the video. At this point we press the brake pedal several times, thus bleeding the old oil; now we close the valve and top up the tank, filling up to the maximum level mark!


Posted on 4 June 2024 by ScegliAuto



Ome replace the disc brake and brake pads on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) We intervene on the disassembly of a front brake disc on a Toyota Corolla. We place our car on a column bridge, we lift to a comfortable height to in
How to replace brake light bulbs in Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) In this tutorial we can see how to replace the brake light bulbs in the Toyota Corolla, a very simple and fast operation. First of all, make sure tha
How do i replace the front brake pads of the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In order to replace the front brake pads of the Toyota Corolla you have to go and lift the car with a jack, so that the corresponding wheel is not in

Other guides that may interest you

How to reset the Renault Master AdBlue warning light

If when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared.

Watch the video!


by ScegliAuto

More videos