Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Door panel

Toyota Land Cruiser - Door panel

Toyota Land Cruiser (1996-2002 / MK 8, J90)
Removing the Toyota Land Cruiser door panel
Remove the screw covers on the side of the fixed door and unscrew the screws underneath. Similarly, remove the clip near the opening handle and access another …read all…
Posted on 30 March 2024 by ScegliAuto
Toyota Land Cruiser (1996-2002 / MK 8, J90)
Remove the door panel on Land Cruiser
Remove the rear panel of the Land Cruiser? We open the door and perform the disassembly. We unscrew the screws placed in the space of the upper lever of the …read all…
Posted on 17 December 2023 by ScegliAuto
Toyota Land Cruiser (2002-2009 / MK 10, J120)
How to disassemble the speaker of a Land Cruiser
Let's see how to disassemble the speaker of a Land Cruiser after removing the door panel. Before starting the disassembly work, let's disconnect the battery …read all…
Posted on 17 November 2023 by ScegliAuto
Alternator (1) Car stereo (2) Key (4) Timing belt (3) Checks and maintenance (11) Differential (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (1) Hand brake (1) Door panel (3) Brake pads (3) Tires (1) Pump (1) Instrument cluster (5) Wheel (2) Fuse box (9) Drums and shoes (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos