Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Door Panel on Toyota Land Cruiser

Model: Toyota Land Cruiser J90, MK 8 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Door trim panel

See other generations:
Video tutorial

Remove the screw covers located on the side of the fixed door and unscrew the screws underneath. Similarly, remove the clip near the opening handle to access another screw.

To remove the screw covers, use a small flathead screwdriver. At this point, unscrew the bolts located under the panel and those located on the side, which can only be accessed with the door open.

Remove the window switch panel by prying it with a plastic wedge, then disconnect its connector. Remove the small frame around the handle and take off the panel.

Proceed in reverse for reassembly.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Removing Door Panel on Land Cruiser
Removing Door Panel on Land Cruiser
Toyota Land Cruiser (1996-2002 / J90, MK 8) Removing the rear panel of the Land Cruiser? Open the door and begin disassembly. Undo the screws located in the upper lever space of the door openin…
How to Dismantle the Speaker of a Land Cruiser
How to Dismantle the Speaker of a Land Cruiser
Toyota Land Cruiser (2002-2009 / MK 10, J120) Learn how to dismantle the speaker of a Land Cruiser after removing the door panel. Before starting the dismantling work, disconnect the battery term…
How to Reset the Tyre Pressure Light on a Toyota Land Cruiser?
How to Reset the Tyre Pressure Light on a Toyota Land Cruiser?
Toyota Land Cruiser (2021-2026 / J300) To reset the tyre pressure light on a Toyota Land Cruiser, first inflate the tyres until they reach the recommended pressure: this can be found by re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos