Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Speaker of a Land Cruiser

Model: Toyota Land Cruiser MK 10, J120 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

Learn how to dismantle the speaker of a Land Cruiser after removing the door panel. Before starting the dismantling work, disconnect the battery terminals located in the boot.

Remove the plastic trim at the corner of the window using a lever; with a screwdriver, unscrew the securing screws located in the plastic handle and in the space of the door opening lever. Once all screws are removed: use the lever to detach the window switch panel and all the plastic clips securing the door.

Remove the door panel, disconnect any power connectors and release cables. Unscrew the screws securing the speaker embedded in the door; disconnect the power connector and remove the speaker.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…
Where is the fuse box located in the Toyota Land Cruiser J120?
Where is the fuse box located in the Toyota Land Cruiser J120?
Toyota Land Cruiser (2002-2009 / MK 10, J120) To locate the box containing all the fuses of your Toyota Land Cruiser j120, you must follow the steps described in our new guide addressed to you. F…
Removing Door Panel on Land Cruiser
Removing Door Panel on Land Cruiser
Toyota Land Cruiser (1996-2002 / J90, MK 8) Removing the rear panel of the Land Cruiser? Open the door and begin disassembly. Undo the screws located in the upper lever space of the door openin…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos