Do it yourself
Frequently asked questions about cars and motorcycles

Removing Door Panel on Land Cruiser

Model: Toyota Land Cruiser MK 8, J90 - Years 1996-2002
Part: Door trim panel

Removing the rear panel of the Land Cruiser? Open the door and begin disassembly. Undo the screws located in the upper lever space of the door opening and the screws present in the handle. Detach the securing clips from behind the cover panel. Finally, pull the panel off with your hands and detach it from the door (disconnect the power wiring and the opening cable). Carry out any necessary maintenance inside the door (if required). Reconnect the electrical connectors and refit the new panel onto the car door. Secure the clips and tighten the screws.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Land Cruiser (1996-2002 / MK 8, J90) Remove the screw covers located on the side of the fixed door and unscrew the screws underneath. Similarly, remove the clip near the opening handle t…
Toyota Land Cruiser (2002-2009 / J120, MK 10) In the Toyota Land Cruiser, the spare wheel is located under the vehicle's floor, corresponding to the boot area. You can access the wheel by opening…
Toyota Land Cruiser (2002-2009 / J120, MK 10) In this video, see how to remove the pollen filter by taking out the glove box on a Toyota Land Cruiser. Open the glove compartment and unclip the pl…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos