Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Pollen Filter on a Toyota Land Cruiser

Model: Toyota Land Cruiser J120, MK 10 - Years 2002-2009
Part: Cabin air filter

In this video, see how to remove the pollen filter by taking out the glove box on a Toyota Land Cruiser. Open the glove compartment and unclip the plastic guides on either side of the drawer (unscrew the screws), then rotate the glove box forward. Pull off the plastic cover acting as a cap and slide out the air filter from its housing. After this, insert the new air filter into the filter holder (ensure the filter is inserted correctly without bending it). Finally, reattach the cover of the box and all components of the glove compartment as they were disassembled.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter in a Toyota Land Cruiser Prado 3?
How to Replace the Pollen Filter in a Toyota Land Cruiser Prado 3?
Toyota Land Cruiser (2002-2009 / J120, MK 10) In this tutorial, you will learn how to replace the pollen filter in a Toyota Land Cruiser Prado 3. First, purchase a new pollen filter. Next, get in…
How to Replace the Cabin Filter in the Toyota Land Cruiser?
How to Replace the Cabin Filter in the Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / J120, MK 10) Replacing the cabin filter in the Toyota Land Cruiser, as we can see in this tutorial, is an extremely simple and quick operation. First, sit in the …
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Where is the cabin fuse box located in the Toyota Land Cruiser J80?
Toyota Land Cruiser (1990-1997 / MK 7, J80) To access the cabin fuse box in your Toyota Land Cruiser J80, follow the steps outlined below. Before starting, ensure the vehicle is parked on a fla…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos