Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter in a Toyota Land Cruiser Prado 3?

Model: Toyota Land Cruiser MK 10, J120 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the pollen filter in a Toyota Land Cruiser Prado 3. First, purchase a new pollen filter. Next, get inside the vehicle, turn off the engine, and pull the handbrake.

The filter is located behind the glove compartment, so open the passenger side door, open the glove box, and remove all items inside. Remove the clips on the sides of the glove box, allowing it to drop fully.

You will now see the filter housing; press the tabs to open the door, pull out the filter, and clean inside the housing with an air compressor. Position the new filter according to the airflow arrows.

Reassemble all parts in reverse order.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

Why has the Toyota Land Cruiser Prado radio stopped working?
Why has the Toyota Land Cruiser Prado radio stopped working?
Toyota Land Cruiser (2002-2009 / MK 10, J120) If the radio in your Toyota Land Cruiser Prado has suddenly stopped working, it is very likely that one of the related fuses has failed, the location…
How to Remove the Pollen Filter on a Toyota Land Cruiser
How to Remove the Pollen Filter on a Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / MK 10, J120) In this video, see how to remove the pollen filter by taking out the glove box on a Toyota Land Cruiser. Open the glove compartment and unclip the pl…
How to Replace the Fuel Filter on a Land Cruiser Prado 3
How to Replace the Fuel Filter on a Land Cruiser Prado 3
Toyota Land Cruiser (2002-2009 / MK 10, J120) This video tutorial demonstrates how to replace the fuel filter on a Land Cruiser Prado 3 by following some simple steps: First, get inside the vehic…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos