Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Land Cruiser
  6. : Why is the autoradio of the Toyota Land Cruiser Prado not working anymore?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser MK 10, J120 - Years 2002-2009
Part: Car stereo
Operation: Why is the autoradio of the Toyota Land Cruiser Prado not working anymore?

If the car radio of our Toyota Land Cruiser Prado has suddenly stopped working, it is very likely that one of the related fuses has blown, whose position is indicated in this video. As shown, there are two of them and they are both located in the box inside the engine compartment, under the plastic cover near the battery. The fuses in question are labeled with the codes F22 and F36 and are respectively 20A and 30A. If they are blown, make sure to replace them with equivalent spare parts and always operate with the vehicle turned off.


Posted on 24 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos