Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Car stereo

Toyota Land Cruiser - Car stereo

Toyota Land Cruiser (2002-2009 / MK 10, J120)
Why is the autoradio of the Toyota Land Cruiser Prado not working anymore?
If the car radio of our Toyota Land Cruiser Prado has suddenly stopped working, it is very likely that one of the related fuses has blown, whose position is …read all…
Posted on 24 March 2024 by ScegliAuto
Toyota Land Cruiser (1996-2002 / MK 8, J90)
Removing your car stereo
Removing the car radio is a fairly simple operation. For this operation it is necessary to use a plastic lever in order not to damage the bodywork. The sides …read all…
Posted on 24 July 2023 by ScegliAuto
Alternator (1) Car stereo (2) Key (4) Timing belt (3) Checks and maintenance (11) Differential (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (1) Hand brake (1) Door panel (3) Brake pads (3) Tires (1) Pump (1) Instrument cluster (5) Wheel (2) Fuse box (9) Drums and shoes (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos