Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Timing belt

Toyota Land Cruiser - Timing belt

Toyota Land Cruiser (2007-2021 / J200, MK 11)
How do you replace the timing belt on a Toyota Land Cruiser?
In order to replace the timing belt on the Toyota Land Cruiser, the engine must be completely extracted from its housing compartment: the bolts that secure the …read all…
Posted on 3 May 2023 by ScegliAuto
Toyota Land Cruiser (2002-2009 / MK 10, J120)
Replacing the timing belt on the Toyota Land Cruiser V8
Let's find out in this guide how to disassemble and replace the timing belt on the 2008 Toyota Land Cruiser, with V8 engine. First of all, let's disassemble …read all…
Posted on 16 March 2024 by ScegliAuto
Toyota Land Cruiser (1990-1997 / J80, MK 7)
Replacing the timing belt on a Toyota Land Cruiser
Let's get ready to replace the timing belt on a Toyota Land Cruiser. We raise the front hood of the engine; we disassemble the ventilation fan to access the …read all…
Posted on 27 November 2023 by ScegliAuto
Alternator (1) Car stereo (2) Key (4) Timing belt (3) Checks and maintenance (11) Differential (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (1) Hand brake (1) Door panel (3) Brake pads (3) Tires (1) Pump (1) Instrument cluster (5) Wheel (2) Fuse box (9) Drums and shoes (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos