Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Cabin air filter

Toyota Land Cruiser - Cabin air filter

Toyota Land Cruiser (2002-2009 / MK 10, J120)
How to replace the pollen filter in the Toyota Land Cruiser Prado 3.
In this video tutorial, we can see how to replace the pollen filter in the Toyota Land Cruiser Prado 3. The first thing to do is to purchase a new pollen …read all…
Posted on 3 May 2023 by ScegliAuto
Toyota Land Cruiser (2002-2009 / MK 10, J120)
How to replace the cabin filter in Toyota Land Cruiser?
Replacing the cabin filter on Toyota Land Cruiser, as we can see in this tutorial, is an extremely simple and fast operation. First of all, position ourselves …read all…
Posted on 30 May 2023 by ScegliAuto
Toyota Land Cruiser (2002-2009 / MK 10, J120)
How to remove the pollen filter on Toyota Land Cruiser
Let's see in this video how to disassemble the pollen filter by removing the drawer on Toyota Land Cruiser. We open the glove compartment and unhook the …read all…
Posted on 19 November 2023 by ScegliAuto
Toyota Land Cruiser (2007-2021 / J200, MK 11)
Cabin air filter replacement
The passenger compartment air filter of this model of vehicle is located on the passenger side, inside the glove compartment: in fact, by opening the glove box …read all…
Posted on 15 September 2023 by ScegliAuto
Alternator (1) Car stereo (2) Key (4) Timing belt (3) Checks and maintenance (11) Differential (1) Fog lights (1) Air filter (1) Cabin air filter (4) Diesel filter (1) Hand brake (1) Door panel (3) Brake pads (3) Tires (1) Pump (1) Instrument cluster (5) Wheel (2) Fuse box (9) Drums and shoes (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos