Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Cabin air filter replacement

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser MK 11, J200 - Years 2007-2021
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter of this model of vehicle is located on the passenger side, inside the glove compartment: in fact, by opening the glove box flap, another flap fixed with two plastic tabs is visible on the bottom; before opening it to access the filter housing, turn on the ignition without starting the engine, turn on the air conditioner and activate the recirculation mode; at this point it is possible to proceed with the replacement of the passenger compartment air filter, taking care to respect the direction of the air flow; when replacing the filter, it is also suggested to sanitize the passenger compartment with a special germicidal spray.


Posted on 15 September 2023 by ScegliAuto



How to replace the cabin filter in Toyota Land Cruiser?
Toyota Land Cruiser (2002-2009 / J120, MK 10) Replacing the cabin filter on Toyota Land Cruiser, as we can see in this tutorial, is an extremely simple and fast operation. First of all, position
How to replace the air filter on Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / J120, MK 10) If we want to proceed in do-it-yourself mode to replace the air filter on this car model, the video and the instructions described in the text below
How to remove the pollen filter on Toyota Land Cruiser
Toyota Land Cruiser (2002-2009 / J120, MK 10) Let's see in this video how to disassemble the pollen filter by removing the drawer on Toyota Land Cruiser. We open the glove compartment and unhook

Other guides that may interest you

How to reset the Renault Master AdBlue warning light

If when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared.

Watch the video!


by ScegliAuto

More videos