Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Dodge Ram 2500?

Model: RAM 2500 MK 4, D2, DS, DJ - Years 2009-2019
Part: Door trim panel

To remove the rear door panel on the Dodge Ram 2500, detach the trim next to the rear door window and the rivets located at the lower side of the panel. Next, remove the cover in the handle area and loosen the screw underneath. Once this screw is removed, disconnect the connectors inside and under the window switch, completely detaching the panel. The panel can now be replaced with a new replacement part.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Dodge Ram 2500
How to Replace the Headlight Bulb on a Dodge Ram 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) To replace the headlight bulb on a Dodge Ram 2500, first remove the grille located in the center of the vehicle, just above the bumper. Once the gril…
How to Remove the Windshield Wiper Motor of the Dodge RAM 2500
How to Remove the Windshield Wiper Motor of the Dodge RAM 2500
RAM 2500 (1994-2001 / BE, BR, MK 2) In this video tutorial, you will learn how to remove and replace the windshield wiper motor of the Dodge RAM 2500 by following these simple steps. Fi…
How to Replace Brake Pads on the Dodge RAM 2500
How to Replace Brake Pads on the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) This guide shows the procedure for removing and replacing the front and rear brake pads on the Dodge RAM 2500. First, lift the vehicle and start by r…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos