Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery on the Dodge Ram 1500 MK4

Model: RAM 1500 DS, DJ, MK 4 - Years 2009-2019
Part: Battery

In this short and simple guide we will see how to remove and replace the battery of the Dodge Ram 1500, fourth generation. First we open the engine hood to access our battery, which we find on the right; then let's disconnect the battery terminals (positive and negative pole), using a 10 mm socket wrench to unscrew the nuts. At this point we unscrew the screws of the battery bracket, in order to lift it and remove it from the battery holder; we just have to replace it with the new one, of the right type, having the same dimensions and the same amperage!

Posted on 17 August 2022 by ScegliAuto

Video tutorial

Related tutorials

How do i replace the battery on the Dodge Ram 1500?
How do i replace the battery on the Dodge Ram 1500?
RAM 1500 (2009-2019 / DS, DJ, MK 4) In order to replace the battery of the Dodge Ram 1500 you have to open the hood and locate the device, which is located in the upper right part of th…
Where can I find the fuse diagram for the Dodge Ram?
Where can I find the fuse diagram for the Dodge Ram?
RAM 1500 (2009-2019 / DS, DJ, MK 4) The fuse layout, or rather the fuse box, of Dodge Ram vehicles, specifically the 2016 Dodge Ram 1500, is an electrical diagram that allows you to eas…
Replace the starter motor on the Dodge RAM 1500
Replace the starter motor on the Dodge RAM 1500
RAM 1500 (1994-2001 / BE, BR, MK 2) Let's replace the starter motor of the Dodge RAM 1500 together, following the instructions below. First of all we open the bonnet and we go to discon…

Other guides you may be interested in

Removing the Drive Shaft on a Fiat Panda

Learn how to remove the drive shaft on a Fiat Panda. Lift the car on a column lift and locate the drive shaft. Using a socket spanner, undo the securing bolts on either side of the drive shaft (remove the bolts around the plates) where it is situated. Once the part is removed, take it out of the vehicle (replace it with a new drive shaft). Finally, refit the new drive shaft (connect it on both sides) and tighten the appropriate bolts. Lower the car and test its proper functioning.

Watch the video!


by ScegliAuto

More videos