Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 1500
    4. : How to replace the remote control battery on Dodge RAM 1500

RAM 1500 - Video tutorial

Model: RAM 1500 DS, DJ, MK 4 - Years 2009-2019
Part: Key
Operation: How to replace the remote control battery on Dodge RAM 1500

In this video tutorial you can see how it is possible to replace the low battery in the remote control of the Dodge RAM 1500 key, following a few simple steps that will guide you to correct management without necessarily having to resort to the assistance of a professional. First you need to get a flat tip screwdriver and a battery similar to the one you are going to replace; now you have to open the cover of the remote control and here you will find the exhausted battery of the remote control; replace it with the new one; close the cover, joining the two plastic shells. Test for proper operation.


Posted on 20 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Ram 1500 2009-2019 - Why did the RAM 1500 key suddenly stop working? Read Answer
    • Ram 1500 2002-2009 - How to unlock the centralized safety of the Dodge Ram 1500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos