Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light in RAM 2500?

Model: RAM 2500 MK 4, DS, DJ, D2 - Years 2009-2019
Part: Tail light

In this tutorial we can see how to disassemble the rear light in the RAM 2500 pick-up, a very simple and fast operation, to be carried out when replacing a bulb or the light itself. After making sure that the key is not inserted, open the lid of the body and unscrew the two fixing screws of the headlight, using a Torx screwdriver. Once this is done, grab the headlight and pull it outwards, extracting it from the bodywork. At this point we can disconnect the rear connector and proceed with the replacement of the damaged element, as needed.

Posted on 16 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear diesel filter on the RAM 2500
How to replace the rear diesel filter on the RAM 2500
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) In today's video tutorial we will see how to remove and replace the rear diesel filter of the RAM 2500, following these simple and quick steps. First…
How to replace the rear logo on the Ram 2500
How to replace the rear logo on the Ram 2500
RAM 2500 (2019-2026 / MK 5, DT) In this video we see how to replace the rear logo of the Ram 2500, the pickup of the Stellantis group. As it is not screwed, the old logo must be det…
How do you remove the rear bumper of the Ram 2500?
How do you remove the rear bumper of the Ram 2500?
RAM 2500 (2009-2019 / MK 4, DS, DJ, D2) In order to replace the rear bumper of the Ram 2500 you have to go to the lower part of the car, so that you can unscrew the screws that secure the b…

Other guides you may be interested in

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos