Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Rearview Mirror of the Ram 1500?

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Side mirror

To replace the outside rearview mirror of the Ram 1500, unscrew the bolts that secure the mirror from the inside. To access these bolts, remove the plastic cover on the inside of the door corresponding to the mirror. Once the cover is removed, you can unscrew the bolts and then remove those securing the door panel. After this is removed, disconnect the connector attached to the mirror and pull the mirror out from the outside, replacing it with a new one.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Bulb in the RAM 1500 Side Mirror
How to Replace the Turn Signal Bulb in the RAM 1500 Side Mirror
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this short and simple guide, follow the instructions to remove and replace the turn signal bulb in the RAM 1500 side mirror. First, remove the mir…
How to Replace the Outside Rearview Mirror of the RAM 1500
How to Replace the Outside Rearview Mirror of the RAM 1500
RAM 1500 (2019-2026 / DT, MK 5) Here are the brief instructions for removing and replacing the outside rearview mirror of the RAM 1500. First, open the front door and start removing…
How to Replace the Side Mirror on a Dodge Ram 1500
How to Replace the Side Mirror on a Dodge Ram 1500
RAM 1500 (2009-2019 / DS, MK 4, DJ) To replace the external side mirror on a Dodge Ram 1500, first remove the triangular plastic cover located near the mirror. Once removed, unscrew the…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos