Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlights in the RAM 3500 pickup?

Model: RAM 3500 DS, MK 4, DJ - Years 2009-2019
Part: Headlight

In this tutorial we can see how to disassemble the headlights in the RAM 3500 pick-up, a very simple operation. First of all, we open the bonnet and remove the upper plastic cover by unlocking the relative clips, then, with a 10mm socket wrench, unscrew the grille fixing bolts and remove it. Then unscrew the headlight bolts placed at the front, using the same key, and disconnect the accessible connector by first removing the small panel placed in the wheel arch. At this point we can extract the headlight and mount the spare by following the reverse procedure.

Posted on 17 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue warning light in the RAM 3500 pickup?
How to reset the AdBlue warning light in the RAM 3500 pickup?
RAM 3500 (2019-2026 / DT, MK 5) If the AdBlue warning light has come on in the instrument panel of our RAM 3500 pickup, it means that the fluid in the emissions system has reached t…
How to remove the rear light in the RAM 3500 pick-up?
How to remove the rear light in the RAM 3500 pick-up?
RAM 3500 (2019-2026 / DT, MK 5) As we can see in this tutorial, disassembling the rear light in the RAM 3500 pickup is very simple. We can do this in case we need to replace a fault…
How to locate the fuse boxes and understand their diagrams in a RAM 3500.
How to locate the fuse boxes and understand their diagrams in a RAM 3500.
RAM 3500 (2019-2026 / DT, MK 5) Locating the fuse box of a RAM 3500 pickup truck is quite simple. As shown in the video, we can find the box in the engine compartment, so it will be…

Other guides you may be interested in

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos