Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. Promaster City
  6. : Removing the front door panel of the Ram Promaster City

RAM Promaster City - Video tutorial

Model: RAM Promaster City MK 1 - Years 2015-2022
Part: Door panel
Operation: Removing the front door panel of the Ram Promaster City

In today's video tutorial we will see how to remove the front door panel of the Ram Promaster City, in simple and quick steps. First we open the front door and start by removing the plastic covers located on the door panel and on the grip handle, by unscrewing the screws below; after which we remove the window control panel, disconnecting the electrical connector located underneath, as shown in the video. At this point we pry the sides of the panel to remove it, disconnecting the cable from the handle; we apply the reverse procedure for reassembly!


Posted on 5 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos