Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and filter on your Ram Promaster

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Checks and maintenance

If we want to proceed with the replacement of the engine oil and the filter on this vehicle model in DIY mode, we will find the information and instructions on how to behave in this video in this description. After opening the bonnet, unscrew the oil filler cap, then raise the car and unscrew the oil draining cap after placing a container for collecting the used oil on the floor. Return to the upper part of the engine compartment to unscrew the oil filter cap with the appropriate wrench, then remove the filter and replace it with the new one after changing the gasket. Then screw the filter cap back on and then screw the emptying cap back on, finally proceed to fill the circuit with the new lubricant.

Posted on 8 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Ram Promaster engine oil and oil filter replacement
Ram Promaster engine oil and oil filter replacement
RAM Promaster (2014-2022 / MK 1) Let's find out in this short guide the instructions that will allow us to carry out the routine maintenance service, replacing the engine oil and oil…
How to replace the engine oil and oil filter of the RAM Promaster.
How to replace the engine oil and oil filter of the RAM Promaster.
RAM Promaster (2014-2022 / MK 1) Below is a guide on how to perform routine maintenance on the RAM Promaster Rapid by changing the engine oil and oil filter. Firstly, we need to lift…
How to reset the oil service in the RAM Promaster van?
How to reset the oil service in the RAM Promaster van?
RAM Promaster (2014-2022 / MK 1) In this tutorial we can see how to reset the oil service in the RAM Promaster van, a very simple and fast operation. Before proceeding, of course, we…

Other guides you may be interested in

Removing the Left Driver's Door Panel on a Toyota Aygo

Carry out the removal of the left driver's door panel on a Toyota Aygo, here’s how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the window winder from the door panel. Unscrew the screws of the upper door opening lever with a screwdriver, then remove the trim plastic near the lever (remove the fastening screws). Use the lever to detach the fastening clips of the door panel from the door. Finally, grasp the panel with your hands and pry it off from the door. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos